DELTA PLUS QUARTZ I (WITH MENTALPHA)
Product images are for illustrative purposes only and may differ from the actual product.
Harness: LDPE. Sweatband: polyester foam.
Product Use – Risks
Certifications and Standards:
REGULATION (EU) 2016/425
EN397:2012 + A1:2012 Protective helmets for industry
|-10°C +50°C||Use : Standard temperatures – -10°C / +50°C|
– Impact*: force transmitted to the headform must not exceed 5 kN at the fall of an object of 5 kg from a 1m height. The impact energy of the helmet at the end of the test is 49 J.
– Penetration*: the tip of the mass used in the test (3 kg over 1m) must not come into contact with the skull.
– Flammability: the helmet should not burn with flame emission for more than 5 seconds after removal of the flame.
* The impact and penetration tests are performed at room temperature, at 50°C and at -10°C
In extreme temperatures: impact and penetration tests are conducted at room temperature at 150°C, at -20°C, or -30°C.
Protects against lateral compression.
The maximum deformation of the helmet should be ≤ 40 mm.
Protects against accidental short-term contact with a live electrical conductor up to 440 VAC.
Resistance to molten metal splashes
Blue, White, Yellow
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.