DELTA PLUS EOS NOCUT VV910

1,019.00

Clear
VV910

Product images are for illustrative purposes only and may differ from the actual product.

Click here to view the Size Guide

Specifications
High-performance polyethylene support. Thermoplastic (TPR) reinforcement on the back and fingertips. Smooth nitrile coating/foam nitrile on palm and fingertips. Embossed inside reinforcement on the palm. Kevlar® thread on all the seams.
Support: High-performance polyethylene fibers.
Coating: nitrile.
Back reinforcement: TPR.
Reinforcement on thumb/forefinger: PVC.
Premium Cut level D
Product Use – Risks
Public worksPublic works
Chem-PetrochemChem-Petrochem
WarehousingWarehousing
MiningMining
Wind EnergyWind Energy
Temporary workers-EducationTemporary workers-Education
CuttingCutting
WearingWearing
ShockShock
PerforationPerforation
Product Highlights & User Benefits

 

 

Double nitrile coating for oily work

1st smooth nitrile coating: impermeable to oils
2nd nitrile foam coating: good adhesion

Flexible reinforcements

Increased protection from impacts and pinches

Reinforcement between the thumb and index finger and on the palm

Increased protection

Protection against impact in the metacarpal area. After an energy impact of 5J, the force transmitted to the back of the hand cannot exceed 4 kN

 

Available only with header card

 

Very good abrasion and cut resistance

Increased lifespan

Kevlar® thread stitching

Increased lifespan

8 cm cuff with Velcro closure

Perfect adjustment
Reduced discomfort at the wrist, during prolonged use

 

 

Safe, qualitative, and very comfortable; the EOS NOCUT is surely one of the gloves with the most interest on the market!

Certifications and Standards

REGULATION (EU) 2016/425 REGULATION (EU) 2016/425

EN ISO 21420:2020 General requirements  

Protective gloves against mechanical Risks (Levels obtained on the palm)

EN388:2016+A1:2018 Protective gloves against mechanical Risks (Levels obtained on the palm)  

4 Resistance to abrasion (from 1 to 4)
X Resistance to cutting (from 1 to 5)
4 Resistance to tear (from 1 to 4)
2 Resistance to puncture (1 to 4)
D Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
P Protection against impact in the metacarpal area (P) (EN13594:2002 6.8.2)

EN13594:2002 4.1.3/6.8.2. Impact energy attenuation  

USA STANDARDS

Hand protection

ANSI-ISEA 105:2016 Hand protection  

A4 Resistance to cutting by sharp objects (from A1 to A9)
Performance and Classification for Impact-Resistant Gloves.

ANSI-ISEA 138:2019 Performance and Classification for Impact-Resistant Gloves.  

1 Impact resistance (from 1 to 3)

 

Documents
Share this product!

Description

HIGH PERFORMANCE POLYETHYLENE KNITTED GLOVE – DOUBLE NITRILE-COATING PALM

Additional information

Color

Yellow-Grey-Black

Size

, , , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.