Product images are for illustrative purposes only and may differ from the actual product.

Click here to view the Size Guide

Double PVC/nitrile coating on polyamide lining. Gauge 18. Third rough PVC/nitrile coating on hand. Length: 30 cm. Thickness: 1 mm on cuff – 1.10 mm on palm.
Support: 100% polyamide.
Coating: PVC/ nitrile.
Category: Tight glove supported

Glove kind: Tight glove

Tight glove kind: Supported

Coating material and finish: Nitrile PVC double-layer

Coating level: Fully coated

Number of layer: Double Layer

Arm level protection: Forearm cuff (< 400mm)

Thickness (μ): 1

Thickness (inch): 0.0393

Gauge: 18

Benefits element: Reach – Free latex – Silicone free – DMF free – Long cuff (>290mm)


Product Use
  • Public works
  • Building
  • Maintenance
  • Chemical industry
  • Automotive
  • Oil & Gas (extraction)
  • Mining
  • Petrochemical
  • Water and waste treatment
  • Power Energy
Protects From The Following Risks
  • Biological
  • Chemical
  • Particules
Product Highlights & User Benefits





Nitrile means no risk of allergies for users

Silicone-free/latex-free/DMF-free to reduce the risk of allergies without leaving traces on components


Lightweight for optimal dexterity/ flexibility

The nitrile coating gives people working in oily/greasy environments an excellent grip on the objects they handle


Rough structure hand

Very good grip

Triple PVC/ nitrile coating

Good resistance to abrasion

100% polyamide support

Very good comfort


Longer service life thanks to a double coating for excellent abrasion resistance


Certifications and Standards:

EN420:2003+A1:2009 General requirements  

EN 388

EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)  

3 Resistance to abrasion (from 1 to 4)
1 Resistance to cutting (from 1 to 5)
2 Resistance to tear (from 1 to 4)
1 Resistance to puncture (1 to 4)
A Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
EN ISO 374-1

EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks.  

TYPE A Type A – Water and air tightness according to EN ISO 374-2:2019. Permeation resistance to at least 6 chemicals at level 2 according to EN16523-1: 2015,
. Determination of resistance to degradation by chemicals according to EN ISO 374-4: 2019. Part 4: Determination of resistance to degradation by chemicals.
K 6 > 480 mn Sodium hydroxide 40% (K) CAS 1310-73-2
L 4 > 120 mn Sulphuric acid 96 % (L ) CAS 7664-93-9
M 2 > 30 mn Nitric acid 65% (M) CAS 7697-37-2
N 2 > 30 mn Acetic acid 99% (N) CAS 64-19-7
P 6 > 480 mn Hydrogen peroxide 30% (P) 7722-84-1
T 6 > 480 mn Formaldehyde 37% (T) CAS 50-00-0
EN ISO 374-5

EN ISO 374-5: 2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements against micro- organisms risks: VIRUS.  

BACTERIA + FUNGI . BACTERIA + FUNGI: Water and air tightness according to EN ISO 374-2:2019.




GLOVE IN PVC/NITRILE ON POLYAMIDE LINING – PVC/NITRILE COATING HAND – 30 CM – Chemical glove offering a very good grip on objects handled during prolonged use

Additional information




, ,