DELTA PLUS PVCC400

429.00

PVCC40010

Product images are for illustrative purposes only and may differ from the actual product.

Click here to view the Size Guide

Specifications
Chemical PVC. PVC on interlock cotton lining. Length: 40 cm / 400mm.
Support: Interlock cotton.
Coating: 100% PVC.Category: Tight glove supported

Glove kind: Tight glove

Tight glove kind: Supported

Coating material and finish: PVC smooth

Coating level: Fully coated

Number of layer : Single layer

Arm level protection: Elbow cuff (<= 500mm)

Thickness (μ): 1,20 -> 1,40 mm

Thickness (inch): 0.0472

Benefits element : Reach – Long cuff (>290mm)

 

Product Use 

 

  • Building
  • Maintenance
  • Chemical industry
  • Oil & Gas (extraction)
  • Mining
  • Petrochemical

 

Protects From The Following Risks
  • Biological
  • Wearing
  • Chemical
  • Particules

 

Product Highlights & User Benefits

 

PVC

Good resistance to abrasion
Material very resistant to oils, chemicals, and petroleum derivatives

Forearm protection

Performance

Extra thick and long for extra protection of the entire arm

 

Certifications and Standards

 

EN420:2003+A1:2009 General requirements  

5 Dexterity (from 1 to 5)
EN 388

EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)  

4 Resistance to abrasion (from 1 to 4)
1 Resistance to cutting (from 1 to 5)
3 Resistance to tear (from 1 to 4)
1 Resistance to puncture (1 to 4)
X Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
EN ISO 374-1

EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks.  

TYPE B Type B – Water and air tightness according to EN ISO 374-2:2019. Permeation resistance to at least 3 chemicals at level 2 according to EN16523-1: 2015 (from 1 to 6).
. Determination of resistance to degradation by chemicals according to EN ISO 374-4: 2019. Part 4: Determination of resistance to degradation by chemicals.
A 4 > 120 mn Méthanol (A) CAS 67-56-1
K 6 > 480 mn Sodium hydroxide 40% (K) CAS 1310-73-2
L 6 > 480 mn Sulphuric acid 96 % (L ) CAS 7664-93-9
EN ISO 374-5

EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements against micro- organisms risks.  

BACTERIA + FUNGI . BACTERIA + FUNGI: Water and air tightness according to EN ISO 374-2:2019.

 

Documents

Description

PVC GLOVES – LENGTH 40 CM – Chemical glove protecting the forearm from oils and hydrocarbons in prolonged use

Additional information

Color

Red

Size