DELTA PLUS EOS VV900JA
Product images are for illustrative purposes only and may differ from the actual product.
Back: Polyester/polyurethane knit.
Back reinforcement: PVC.
Product Use – Risks
Product Highlights and User Benefits
Double layer of polyamide/ polyurethane on the palm with non-slip PVC dots
Longer life due to its very good abrasion resistance
Good grip on handled objects
Increased protection from impacts and pinches
Reinforcement between the thumb and index finger and on the palm.
Available only with header card
Protection of the metacarpal area against low energy shocks <2J
8 cm cuff in neoprene
Good glove retention for high security
Reduced discomfort at the wrist, during prolonged use
Easy visual identification at the workstation
Certifications and Standards
REGULATION (EU) 2016/425
EN ISO 21420:2020 General requirements
EN388:2016+A1:2018 Protective gloves against mechanical Risks (Levels obtained on the palm)
|3||Resistance to abrasion (from 1 to 4)|
|2||Resistance to cutting (from 1 to 5)|
|2||Resistance to tear (from 1 to 4)|
|2||Resistance to puncture (1 to 4)|
|B||Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)|
|P||Protection against impact in the metacarpal area (P) (EN13594:2002 6.8.2)|
ANSI-ISEA 105:2016 Hand protection
|A2||Resistance to cutting by sharp objects (from A1 to A9)|