DELTA PLUS PETRO VE780
Product images are for illustrative purposes only and may differ from the actual product.
Thickness: 1.30 mm.
Product Use – Risks
Product Highlights & User Benefits
Good grip of handled objects
Good resistance to abrasion
Material very resistant to oils, chemicals, and petroleum derivatives
Certifications and Standards
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
|5||Dexterity (from 1 to 5)|
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
|4||Resistance to abrasion (from 1 to 4)|
|1||Resistance to cutting (from 1 to 5)|
|3||Resistance to tearing (from 1 to 4)|
|1||Resistance to puncture (1 to 4)|
|X||Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)|
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and microorganisms – Part 1: Terminology and performance requirements for chemical risks.
|TYPE||B||Type B – Water and air tightness according to EN374-2:2014. Permeation resistance to at least 3 chemicals at level 2 according to EN16523-1: 2015 (from 1 to 6).|
|.||Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of resistance to degradation by chemicals.|
|J||2 > 30 mn||n-Heptane (J) CAS 142-85-5|
|K||6 > 480 mn||Caustic soda 40% (K) CAS 1310-73-2|
|L||4 > 120 mn||Sulphuric acid 96 % (L ) CAS 7664-93-9|
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements against microorganisms risks.
|BACTERIA + FUNGI||.||BACTERIA + FUNGI: Water and air tightness according to EN374-2:2014.|