DELTA PLUS PETRO VE766

909.00

VE766

Product images are for illustrative purposes only and may differ from the actual product.

Click here to view the Size Guide

Specifications
Chemical PVC. PVC on cotton knitted lining. Rough-textured hand. Length: 62 cm.
Support: Cotton.
Coating: PVC grip textured – Fully coated
Thickness: 1.30 mm.

Category: Tight glove supported

Glove kind: Tight glove

Tight glove kind: Supported

Coating material and finish: PVC grip textured

Coating level: Fully coated

Number of layers: Single layer

Arm level protection: Shoulder cuff (> 500mm)

Thickness (μ): 1,30

Thickness (inch): 0.0511

Gauge: 13

 

Product Use
  • Building
  • Maintenance
  • Chemical industry
  • Automotive
  • Oil & Gas (extraction)
  • Mining
  • Petrochemical
  • Water and waste treatment
Protects From The Following Risks
  • Biological
  • Wearing
  • Chemical
  • Particules
Product Highlights & User Benefits

Silicon-free

Textured structure

Good grip on handled objects

Performance

Extra thick and long for extra protection of the entire arm

Good resistance to abrasion
Material very resistant to oils, chemicals, and petroleum derivatives

Complete arm protection

 

Certifications and Standards

EN420:2003+A1:2009 General requirements  

5 Dexterity (from 1 to 5)
EN 388

EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)  

4 Resistance to abrasion (from 1 to 4)
1 Resistance to cutting (from 1 to 5)
3 Resistance to tear (from 1 to 4)
1 Resistance to puncture (1 to 4)
X Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
EN ISO 374-1

EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks.  

TYPE B Type B – Water and air tightness according to EN ISO 374-2:2019. Permeation resistance to at least 3 chemicals at level 2 according to EN16523-1: 2015 (from 1 to 6).
. Determination of resistance to degradation by chemicals according to EN ISO 374-4: 2019. Part 4: Determination of resistance to degradation by chemicals.
J 2 > 30 mn n-Heptane (J) CAS 142-85-5
K 6 > 480 mn Sodium hydroxide 40% (K) CAS 1310-73-2
L 4 > 120 mn Sulphuric acid 96 % (L ) CAS 7664-93-9
EN ISO 374-5

EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements against microorganisms risks.  

BACTERIA + FUNGI . BACTERIA + FUNGI: Water and air tightness according to EN ISO 374-2:2019.

 

Documents

Description

FULL PVC COATING ON JERSEY LINER GLOVE – LENGTH 62CM – Chemical glove combining comfort, full arm protection, good grip on objects handled for resistance to oils and hydrocarbons

Additional information

Color

Blue

Size

, ,