DELTA PLUS FORESTIER 3

1,629.00

FORE3OR

Product images are for illustrative purposes only and may differ from the actual product.

Specifications
Forester’s type helmet consists of a ZIRCON safety helmet: UV-resistant high-density polyethylene (HDPE) or polypropylene (PP). Sweatband. Low-density (LDPE) polyethylene cradle with 8 fixing points. SUZUKA2 ear defenders. VISOR HOLDER face shield holder. VISORG mesh visor. Cardboard packaging.
Helmet: high-density polyethylene (HDPE) or polypropylene (PP). Harness: LDPE. Sweatband: Polyester foam.
Ear defender: Cup and headband: ABS. Pad: synthetic foam and PVC.
Visor: Steel – Plastic.
 Weight: 762 g
Face shield – Integrated option
Product Use
  • Agriculture
  • Forestry
Protects From The Following Risks
  • Noise
  • Shock
  • Electrical
Product Highlights and User Benefits

 

Compatibility

Compatible with safety glasses

Compatible with noise-canceling headphones

Comfort

Features 3 textile straps with 8 fixing points for an optimal spread of weight

Adjustable headband, low or top, for a better position and increasing fit and comfort

Adjustable from 53 cm to 63 cm for optimum comfort

Hygiene

Replaceable headband for better hygiene

Replaceable suspension for better hygiene

Removable brow pad washable and replaceable for a perfect hygiene solution

Performance

Adjustable headband, low or top, for a safer fit and holding the cap in place when moving head

 

Certifications and Standards

EN397:2012 + A1:2012 Protective helmets for industry  

-10°C +50°C Use: Very low temperature – -30°C / +50°C
440VAC Electric insulation

Protective helmets for the industry.

MANDATORY
– Impact*:
 force transmitted to the headform must not exceed 5 kN at the fall of an object of 5 kg from a 1m height. The impact energy of the helmet at the end of the test is 49 J.
– Penetration*: the tip of the mass used in the test (3 kg over 1m) must not come into contact with the skull.
– Flammability: the helmet should not burn with flame emission for more than 5 seconds after removal of the flame.

* The impact and penetration tests are performed at room temperature, at 50°C and at -10°C
OPTIONAL
In extreme temperatures: impact and penetration tests are conducted at room temperature at 150°C, at -20°C, or -30°C.
Protects against lateral compression.
The maximum deformation of the helmet should be ≤ 40 mm.
Protects against accidental short-term contact with a live electrical conductor up to 440 VAC.
Resistance to molten metal splashes

GS-ET-29

EN50365:2002 Electrically insulating helmets for use on low voltage installations  

CLASS 0 Electrically insulating helmets – Class 0

Electrical insulation helmets for use in low-voltage environments.

MANDATORY

Electrically insulating helmets for use near energized equipment not exceeding 1,000 VAC or 1,500 VDC (appliance class 0).
Used simultaneously with other electrically insulating protective equipment, these helmets prevent dangerous currents from passing through to the person’s head.
These optional electrical insulation tests are more stringent than the EN397 and they complement them.
(2 triangle marking, Class 0).

EN1731:2006 Mesh-type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat.  

F Oculars
Material specifications, design, performance, and test methods for eye and face mesh type protection, for professional use.

EN352-3:2002 Hearing protection: Ear-Muffs attached to an industrial safety helmet  

SNR 24 dB Average noise attenuation
H 27 High-frequency attenuation
M 21 Medium frequency attenuation
L 14 Low-frequency attenuation
S/M/L Sizes / Dimensions
The adjustable head defenders for the safety helmets.

Description

COMPLETE FORESTER TYPE HELMET – Safety helmet ideal for clearing applications due to its protective gauze visor and soundproof shells

Additional information

Weight 0.900 kg
Color

Orange