Description
HIGH-PERFORMANCE POLYETHYLENE KNITTED GLOVE – DOUBLE NITRILE-COATING PALM
DELTA PLUS EOS NOCUT WINTER VV913
₱1,379.00
Product images are for illustrative purposes only and may differ from the actual product.
Click here to view the Size Guide
Specifications
High-performance polyethylene support. TPR reinforcement on back and fingertips. Double smooth nitrile coating/foam nitrile on palm and fingertips. Embossed inside reinforcement on the palm. Inside acrylic lining. Kevlar® thread on all the seams.
Support: High-performance Polyethylene fibers.
Coating: Nitrile.
Back reinforcement: TPR.
Reinforcement on thumb/forefinger: TPR.
Lining: Acrylic.
Coating: Nitrile.
Back reinforcement: TPR.
Reinforcement on thumb/forefinger: TPR.
Lining: Acrylic.
Product Use – Risks
Heavy industry
Construction / Civil engineering
Services / Logistics
Oil / Gas
CUTTING
COLD
Wearing
Shock
PERFORATIONProduct Highlights & User Benefits
Double nitrile coating for oily work
1st smooth nitrile coating : impermeable to oils
2nd nitrile foam coating : good adhesion
Flexible reinforcements
Increased protection from impacts and pinches
Reinforcement between the thumb and index finger and on the palm
Increased protection
Acrylic interior support
Excellent comfort all day long
Maintains heat
Protection against impact in the metacarpal area. After an energy impact of 5J, the force transmitted to the back of the hand cannot exceed 4 kN.
Available only with header card
Very good resistance to abrasion and cutting
Increased lifespan
Kevlar® thread stitching
Increased lifespan
8 cm cuff with Velcro closure
Perfect adjustment
Reduced discomfort at the wrist, during prolonged use
Certifications and Standards
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
| 5 | Dexterity (from 1 to 5) |
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
| 4 | Resistance to abrasion (from 1 to 4) | |
| X | Resistance to cutting (from 1 to 5) | |
| 4 | Resistance to tearing (from 1 to 4) | |
| 4 | Resistance to puncture (1 to 4) | |
| D | Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) | |
| P | Protection against impact in the metacarpal area (P) (EN13594:2002 6.8.2) |
EN511:2006 Protective gloves against cold (X = Unrealized test)
| 1 | Resistance to convective cold (from 1 to 4) | |
| 3 | Resistance to contact cold (from 1 to 4) | |
| X | Waterproof (0 or 1) |
USA STANDARDS
ANSI-ISEA 105:2016 Hand protection
| A4 | Resistance to cutting by sharp objects (from A1 to A9) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.